Sat to Thu, 9:00 AM to 7:00 PM GST · All 7 Emirates +971 56 689 9831 WhatsApp info@urbanfloorings.com العربية Русский
Skip to content

Terrazzo Flooring in Dubai & Abu Dhabi

Classic terrazzo flooring in poured in-situ and precast tile forms, with cement or epoxy binders, ground and polished to a smooth speckled finish. Supplied and fitted by one team since 2013, with free site visits across the UAE.

  • Established 2013
  • 10,000+ Projects
  • Poured & Precast
  • Cement & Epoxy
  • Ground & Polished
  • Free Site Visit

Or call +971 56 689 9831

Polished terrazzo floor in a Dubai interior

What Is Terrazzo Flooring?

Terrazzo flooring is made from chips of marble, granite or glass set in a cement or epoxy binder, then ground and polished to a smooth, speckled surface. It can be poured in place for a continuous floor or laid as precast terrazzo tiles, and terrazzo tiling suits floors, walls and countertops. Epoxy terrazzo is also known as liquid terrazzo. Urban Flooring supplies and fits terrazzo across Dubai and Abu Dhabi.

It is one of the oldest decorative floors still in use, and one of the longest-lived. The two choices that shape a terrazzo floor, how it is laid and what binds the chips, are covered next.

Types of Terrazzo Flooring

Terrazzo comes in two forms and two binders. Poured in-situ terrazzo is mixed and laid on site as one continuous floor. Precast terrazzo arrives as finished tiles or slabs. The binder is either cement, the traditional system, or epoxy resin, which cures faster, is lighter and carries brighter colours.

Poured in-situ terrazzo floor

Poured / In-Situ Terrazzo

Continuous, the original form Mixed and laid wet on site, then ground and polished into a continuous, jointless floor. The original and most durable form, premium and labour-intensive.
Precast terrazzo tiles

Precast Terrazzo Tiles

Faster, more affordable Factory-made terrazzo cut into tiles, laid like any tile. Faster to fit, more consistent and more affordable than poured.
Cement and epoxy terrazzo binder samples

Cement vs Epoxy Binder

The binder decision Cement terrazzo is traditional, heavy-duty and suits indoor and outdoor use. Epoxy terrazzo uses a resin binder, cures faster, offers more colours and is lighter for upper floors, but is for indoor use. See our epoxy flooring page for more on resin systems. If you are weighing other joint-free, poured-look finishes, our joint-free floor options guide compares epoxy and microcement side by side.
FeaturePoured cement terrazzoPoured epoxy terrazzoPrecast terrazzo tiles
How it is laidMixed and laid wet on siteMixed and laid wet on siteFactory-made tiles, laid like any tile
JointsContinuous, divider strips onlyContinuous, divider strips onlyGrouted tile joints
Indoor or outdoorIndoor and outdoorIndoor onlyDepends on the binder, ask before specifying
Colour rangeTraditional paletteWidest, brighter coloursMost consistent batch to batch
WeightHeavierLighter, suits upper floorsTile weight, varies
Time on siteAbout two weeksAbout two weeksA few days
Cost per sqm (AED)120 to 200150 to 260100 to 150
Covered by EN 13748-1No, mixed on siteNo, mixed on siteYes, ask for the test data
Best forLarge continuous areas, heavy dutyFeature interiors, bold colour, upper floorsSmaller areas, faster handover, tighter budgets

The Terrazzo Look

Aggregate sets the character: marble, granite, glass, quartz and mother-of-pearl chips make up most of the surface, in sizes from fine micro-chip to large Venetian-style. Colours run from white, grey and classic black and white to cream, terracotta, blush pink and gold, with bold yellow, green or blue chips. Binder colour and chip mix tune to almost any palette, and divider strips zone colours or set patterns, as well as acting as control joints that decide where movement in the slab shows.

Terrazzo aggregate and colour options

Why Choose Terrazzo

Terrazzo is specified where a floor has to outlast the fit-out around it. It is not a covering laid over a subfloor and lifted later, it is a finished stone surface that is reground when it wears, so it is judged on decades rather than years. That is why it turns up in lobbies, retail and hospitality as often as in homes.

Extremely Long-LastingTerrazzo floors last decades, often longer than the building's other finishes.
Continuous, No Grout LinesPoured terrazzo has no joints to trap dirt.
Design-FlexibleA vast range of aggregate, colour and pattern options.
Low MaintenanceEasy to clean and re-polish when sealed.
TimelessA heritage material with a strong contemporary look.
A Premium FinishA characterful, high-design floor.

Where Terrazzo Falls Short

Poured terrazzo is a premium, slower install with skilled grinding and polishing, and like all stone it can feel hard and cool underfoot. Precast tiles are the faster, lower-cost route to the look.

Where Terrazzo Works

Villas and apartments, lobbies and entrances, retail and showrooms, hotels, restaurants and cafes, bathrooms and feature areas, and commercial and institutional spaces that want a durable, high-design floor. Still deciding if terrazzo is the right fit? Our how to choose flooring guide walks through the trade-offs against other finishes.

Grinding, Polishing and Finish

The finish is where terrazzo is made. After curing, the surface is ground back to expose the aggregate, then polished through successive grits to the chosen sheen, from a soft matt to a high polish, and sealed for protection and stain resistance.

Terrazzo Flooring Prices in Dubai

Terrazzo is priced by system. Precast tiles are the most economical, at around AED 100 to 150/sqm (about AED 9.3 to 13.9/sqft). Poured cement terrazzo runs AED 120 to 200/sqm, and epoxy terrazzo AED 150 to 260/sqm, because the resin costs more and the grinding and polishing is done on site. Indicative supply-and-fit guide:

TypePer sqm (AED)Per sqft (AED approx)
Precast terrazzo tiles100 to 1509.3 to 13.9
Cement terrazzo (poured)120 to 20011.1 to 18.6
Epoxy terrazzo (poured)150 to 26013.9 to 24.2

Poured systems include grinding and polishing; large-chip Venetian and custom designs sit at the upper end and can run higher; larger areas attract better rates.

Indicative supply-and-fit ranges for guidance only, subject to type, aggregate, finish, design and area. Request a free site visit for an exact quote.

How We Install Terrazzo

Installation depends on the system. Poured terrazzo is laid wet over a prepared substrate, left to cure, then ground and polished in stages on site. Precast tiles are set on a levelled subfloor, then grouted, polished and sealed, so most of the finishing has already happened in the factory before the tiles arrive.

Grinding and polishing a terrazzo floor in Dubai

Poured in-situ

  1. Base preparation, then divider strips set out as control joints and design lines.
  2. Terrazzo mix poured, spread and compacted.
  3. Cured, then ground to expose the aggregate.
  4. Polished through grits and sealed.

Precast tiles

  1. Subfloor prepared and levelled.
  2. Tiles laid and set.
  3. Grouted, polished and sealed.

Poured terrazzo takes around two weeks including curing and polishing; precast tiles fit in a few days.

Precast terrazzo tiles are covered by EN 13748-1, the European standard for terrazzo tiles in internal use. It sets how tiles are tested for breaking strength, abrasion resistance and dimensional tolerance, so tiles from different suppliers can be compared on the same basis. Ask for the test data behind any precast tile you are quoted. Poured in-situ terrazzo is mixed on site and sits outside that standard, which is why the applicator's workmanship matters more there.

Terrazzo Flooring Across the UAE

Dubai is our home market, from villas and apartments to lobbies, hotels and retail. Abu Dhabi is our second core market, including Saadiyat Island, Yas Island, Al Reem Island, Al Raha Beach and Khalifa City.

Beyond the two, we supply and fit across all seven emirates, with free site visits throughout the areas we serve.

Terrazzo Flooring FAQs

Is terrazzo a good choice for homes and projects in Dubai?

Yes. Terrazzo is extremely durable, low-maintenance and design-flexible, which suits Dubai villas, lobbies, retail and hospitality spaces alike. Its speckled look works in both contemporary and classic interiors, and it lasts for decades. We advise on the right type and finish during a free site visit.

Poured terrazzo or terrazzo tiles, which is better?

Poured in-situ terrazzo gives a continuous, jointless floor and the longest life, but it is a premium, slower install. Precast terrazzo tiles are faster to fit and more affordable, with a very similar look. We recommend poured for large feature areas and tiles where speed and budget matter.

What is the difference between cement and epoxy terrazzo?

Cement terrazzo uses a traditional cement binder, is heavy-duty and works indoors and outdoors. Epoxy terrazzo uses a resin binder, cures faster, offers more colours and is lighter for upper floors, but is for indoor use only. We help you choose based on the space and the look you want.

How much does terrazzo flooring cost in Dubai?

As an indicative guide, supply and fit runs from around AED 100/sqm (about AED 9.3/sqft) for precast tiles, AED 120 to 200/sqm for poured cement terrazzo, and AED 150 to 260/sqm for epoxy terrazzo. Aggregate and design affect the price. Request a free site visit.

How long does terrazzo flooring last?

Terrazzo is one of the longest-lasting floors there is. A well-laid, sealed terrazzo floor lasts for decades, often outliving other finishes in the building, and can be re-polished to look new again. Its durability is a big reason it is used in high-traffic public spaces.

Can terrazzo be polished and restored?

Yes. Terrazzo can be re-ground and re-polished to remove wear, scratches and dullness, bringing an old floor back to life, which is one of its great advantages over most other floors. Resealing afterwards keeps it protected. We offer polishing and restoration as well as new installation.

Where can terrazzo be used, including bathrooms and walls?

Terrazzo suits floors throughout a home or project, and also works on walls, stairs, vanities and feature surfaces. Sealed terrazzo handles bathrooms and wet areas well. Its versatility across surfaces is part of why designers favour it. We advise on suitability for each area.

Do you supply only, or also install?

Terrazzo, especially poured in-situ, is specialist work that needs skilled laying, grinding and polishing, so we supply and install it as a complete service. One team handles the floor from preparation to final polish, so there is a single point of accountability. Free site visit comes as standard.

Get Your Free Terrazzo Flooring Quote

From a precast-tile floor to a poured in-situ feature space, we supply, install, grind and polish terrazzo in cement and epoxy systems across Dubai, Abu Dhabi and all seven emirates. Every job starts with a free site visit and a written quote, so the system, the chip mix and the cost are agreed before work begins.

Or call +971 56 689 9831

Urban Flooring Maintenance and Decor Works 7 24A Street, Al Quoz Industrial First, Al Quoz, Dubai, UAE
Sat to Thu 9:00 AM to 7:00 PM GST · Closed Friday
+971 56 689 9831 · info@urbanfloorings.com
Get Directions
Call Now Button